Engine

Please ask

Engine

Engine rebuild service with bench start, shakedown and performance checking.

In partnership with the best in engine development and competition to offer the highest level of engine rebuild service and quality assurance. Our partner, Engiser 101 has developed and built engines that have won national, European and World championships for brands and customers around the world. www.engiser101.com. More details below or contact us at...

On sale!

In Stock

Engine

Standard piston and liner set 76.00mm

€308.20

Complete set of gt turbo pistons, liners, rings and pins 76.00mm standard

In Stock

Engine

New Cylinder Head

€330.00

Cylinder head with exclusive specification on the market, NEW and made of current AlSi7Cu3Mg casting for C1J Turbo engines (Renault 5 Gt Turbo / Renault 11 Turbo), with seats and guides. Cylinder head options, complete parts breakdown for self-assembly, or a pre-assembled assembly with chambers tested and sized to 43.50cc. The parts breakdown includes: -1...

In Stock

Engine

Standard crankshaft. 77mm stroke.

€385.60

Cigueñal nuevo de carrera standard de 77mm.

In Stock

Engine

Standard rod (piece)

€54.80

Biela standard equipada con espárragos y tuercas. Precio por unidad.

Exclusive GTTURBOPARTS.com In Stock

Engine

Oil pump repair set. Pinion & axle.

GT Turbo Parts

€185.00

Set of pinion and gear for oil pump restoration.

Water pump (Complet assy. incl gaskets) 2

In Stock

Engine

Water pump (Complet assy. incl gaskets)

€89.00

Water pump (Complet assy.) Metalic turbine and 14.3mm outlet.

In Stock

Engine

Basic engine rebuild set

€623.30

Kit composed by: -Standard crankshaft -4x Liners + 4x pistons + 4 sets of rings + 4 pins

In Stock

Engine

General engine rebuild set

€1,014.00

Kit de reconstrucción motor general compuesto por: -Equipo de motor standard 76mm de diámetro. -Testata totalmente nueva, con asientos y guías nuevos. -Cigüeñal standard de 77mm de carrera. -Cojinetes de biela standard. -Cojinetes de bancada standard. -Cojinetes axiales de cigueñal standard.

In Stock

Engine

Total engine rebuild set

€1,494.35

Full kit for engine rebuild: -Cylinder head -STD 76mm pistons, pins, rings and liners. -Nitrided crankshaft. -Gaskets set -High tensile head bolts. -Oil filter. -Fuel filter (tell us Phase 1 or 2). -Intake and exhaust valves -Valve stem seals. -Spark plugs -Oil pump repair set (pinion and rotor). -STD rod and crank bearings.

In Stock

Engine

Forged rods

€475.00

H beam connecting rods including bolts. These connecting rods must be used with forged pistons or provide for the machining of standard pistons for the use of circlips. Selet in the right side your options to acquire the trimetallic bearings in a special deal.

84mm strocker crankshaft (1.600cc & 1.700cc)

In Stock

Engine

84mm strocker crankshaft (1.600cc & 1.700cc)

€535.00

In Stock

Engine

Engine gasket set (lower engine)

€68.30

In Stock

Engine

Upper engine gasket set.

€72.65

Upper engine gasket set. Set include: -1 cylinder head gasket. 1.9mm and metalic sheet. -1 manifold gasket. metalic sheet. -1 Water pump inner gasket. -1 Water pump outer gasket. -1 head end gasket. -1 rocker cover gasket. -3 rocker cover nut gaskets.

On sale!

In Stock

Engine

Crank bench reinforcement kit

GT Turbo Parts

€159.00

Crankshaft bench reinforcement kit, consisting of: -Spacers. -High strength bolts. -Reinforcement plate manufactured in CNC, of aerospace steel of 1100Mpa. Designed, optimized and simulated in the design department of a WRC team currently and with experience in WTCC and Rallycross.

In Stock

Engine

Crankshaft bearing

€47.98

In Stock

Engine

Rod bearings. STD

€36.80

In Stock

Engine

Crankshaft thrust bearings. STD.

€18.00

In Stock

Engine

Trimetallic rod bearing

ACL Race Bearings

€97.00

ACL RACE BEARINGS set. Standard Size

In Stock

Engine

Trimetallic main bearings

ACL Race Bearings

€108.00

ACL RACE BEARINGS set. Standard Size

Stroker Kit 1.6L Pistons, Liners and 84mm Crankshaft.

On sale!

In Stock

Engine

Stroker Kit 1.6L Pistons, Liners and 84mm Crankshaft.

€829.00

Note: Block works required.

In Stock

Engine

80mm liners and forged pistons (1700cc)

€1,390.00

80mm pistons and liners. Spedific design to be used with the 84mm crankshaft (That need to be modified).

77.00mm Flat pistons and liners for 1.6L kit

In Stock

Engine

77.00mm Flat pistons and liners for 1.6L kit

€475.00

For 84mm crankshaft Cheapest way to increase capacity. Cast pistons. Note: Modifications in the block are required.

Out-of-Stock

Engine

STD Ø76.00mm Iasa forged pistons.

IASA

€799.00

Standard 76.00mm Diameter Wössner forged pistons. Including rings, pins and circlips.

View

Set of 4 800 spheroidal steel sleeves. 76.00mm

In Stock

Engine

Set of 4 800 spheroidal steel sleeves. 76.00mm

€442.70

4 steel liners with spheroidal structure class 800, essential in high performance preparations. 76.00mm standard diameter. (1,397cc)

Ø77.00mm IASA forged pistons (1.434 - 1.564cc).

In Stock

Engine

Ø77.00mm IASA forged pistons (1.434 - 1.564cc).

IASA

€815.00

77.00mm Diameter Iasa forged pistons (STD +1.00mm). Including rings, pins and circlips. Stroke 77mm or 84mm (1.434 - 1.564cc).

Set of 4 800 spheroidal steel sleeves. 77.00mm

In Stock

Engine

Set of 4 800 spheroidal steel sleeves. 77.00mm

€460.10

4 steel liners with spheroidal structure class 800, essential in high performance preparations. 77.00mm diameter. (1,434cc)

In stock

Engine

High tensile head bolts

€34.00

Tornillos de culata de alta resistencia. Tornillos de culata de calidad 12.9, vendidos en juegos.

In stock

Engine

Head stud and nut kit

GT Turbo Parts

€150.00

Kit designed for high-torque cylinder head tightening of up to 100 Nm for high-pressure applications. Consisting of 10 studs, 10 high-modulus steel nuts of 12 points for uniform tightening, and 10 specific lock washers. Reusable indefinitely. Rolled threads provide up to 30% greater surface rigidity than conventionally cut threads. Ground friction...

Multy layer head gasket for std piston diameter of 76.00mm

Multy layer head gasket for std piston diameter of 76.00mm 2

In Stock

Engine

Multy layer head gasket for std piston diameter of 76.00mm

ATHENA

€165.10

ATHENA muli layer head gasket, completely metallic composed of 4 blades to be used in street applications up to the highest performance, for pistons with stantard diameter of 76.00mm. Its thickness is 1.8mm constant since it is not compressed like polymer joints. REUSABLE up to 4 times according to surfaces and tighten.

Athena multi layer head gasket for piston diameters of 77.00 & 78.00mm

Athena multi layer head gasket for piston diameters of 77.00 & 78.00mm 2

Out-of-Stock

Engine

Athena multi layer head gasket for piston diameters of 77.00 & 78.00mm

ATHENA

€196.66

ATHENA muli layer head gasket, completely metallic composed of 4 blades to be used in street applications up to the highest performance, for pistons with diameters of 77.00 and 78.00mm. Its thickness is 1.8mm constant since it is not compressed like polymer joints. REUSABLE up to 4 times according to surfaces and tighten.

View

1.9mm head gasket with independent rings. Ultimate sealing

In Stock

Engine

1.9mm head gasket with independent rings. Ultimate sealing

€230.00

For high performance and unparalleled tightness in the area of greatest pressure concentration of the engine. The use of this gasket is recommended for applications where tightness is not a compromise. The function of the independently manufactured rings is to ensure absolute tightness in the combustion chamber while the composite gasket absorbs small...

In Stock

Engine

Manifold gasket

€23.70

Double Metallic manifold gasket. Maximum resistance to pressure and temperature.

In Stock

Engine

Timing tensioner

€48.50

Tensor hidráulico de distribución. *Único tensor de calidad en el mercado.

In Stock

Engine

Timing chain

€19.90

Cadena de distribución. Cadena de distribución nueva.

In Stock

Engine

Valve kit (4 intake + 4 exhaust)

€83.00

Kit entero de válvulas nuevas para completar un motor.

Showing 1-36 of 245 item(s)