Head stud and nut kit

Head stud and nut kit

Head stud and nut kit

Head stud and nut kit

Head stud and nut kit

Head stud and nut kit

Head stud and nut kit

Head stud and nut kit

Head stud and nut kit

Kit designed for high-torque cylinder head tightening of up to 100 Nm for high-pressure applications. Consisting of 10 studs, 10 high-modulus steel nuts of 12 points for uniform tightening, and 10 specific lock washers. Reusable indefinitely. Rolled threads provide up to 30% greater surface rigidity than conventionally cut threads. Ground friction surface. Recommended for racing use and high boost pressure applications.

In stock

€150.00

Tax included

Product Details

You might also like

New Cylinder Head

New Cylinder Head 2

In Stock

Engine

New Cylinder Head

Cylinder head with exclusive specification on the market, NEW and made of current AlSi7Cu3Mg casting for C1J Turbo engines (Renault 5 Gt Turbo / Renault 11 Turbo), with seats and guides. Cylinder head options, complete parts breakdown for self-assembly, or a pre-assembled assembly with chambers tested and sized to 43.50cc. The parts breakdown includes: -1...

Multy layer head gasket for std piston diameter of 76.00mm

Multy layer head gasket for std piston diameter of 76.00mm 2

In Stock

Engine

Multy layer head gasket for std piston diameter of 76.00mm

ATHENA muli layer head gasket, completely metallic composed of 4 blades to be used in street applications up to the highest performance, for pistons with stantard diameter of 76.00mm. Its thickness is 1.8mm constant since it is not compressed like polymer joints. REUSABLE up to 4 times according to surfaces and tighten.

STD Ø76.00mm Iasa forged pistons.

Out-of-Stock

Engine

STD Ø76.00mm Iasa forged pistons.

Standard 76.00mm Diameter Wössner forged pistons. Including rings, pins and circlips.

View

Ø77.00mm IASA forged pistons (1.434 - 1.564cc).

Out-of-Stock

Engine

Ø77.00mm IASA forged pistons (1.434 - 1.564cc).

77.00mm Diameter Iasa forged pistons (STD +1.00mm). Including rings, pins and circlips. Stroke 77mm or 84mm (1.434 - 1.564cc).

View

Athena multi layer head gasket for piston diameters of 77.00 & 78.00mm

Athena multi layer head gasket for piston diameters of 77.00 & 78.00mm 2

In Stock

Engine

Athena multi layer head gasket for piston diameters of 77.00 & 78.00mm

ATHENA muli layer head gasket, completely metallic composed of 4 blades to be used in street applications up to the highest performance, for pistons with diameters of 77.00 and 78.00mm. Its thickness is 1.8mm constant since it is not compressed like polymer joints. REUSABLE up to 4 times according to surfaces and tighten.

1.9mm head gasket with independent rings. Ultimate sealing

In Stock

Engine

1.9mm head gasket with independent rings. Ultimate sealing

For high performance and unparalleled tightness in the area of greatest pressure concentration of the engine. The use of this gasket is recommended for applications where tightness is not a compromise. The function of the independently manufactured rings is to ensure absolute tightness in the combustion chamber while the composite gasket absorbs small...

80mm liners and forged pistons (1700cc)

In Stock

Engine

80mm liners and forged pistons (1700cc)

80mm pistons and liners. Spedific design to be used with the 84mm crankshaft (That need to be modified).

6 other products in the same category:

Magnetic sump cap

In Stock

Engine

Magnetic sump cap

Made in anodized aluminum, with magnetic pin. It keeps the small metal bits coming from the engine, avoiding they keep in the oil system.

Perc switch

In stock

Electrics

Perc switch

M10x1 or M8 Thread

Bonnet soundproof panel 7700754120 . Clips included

Bonnet soundproof panel 7700754120 . Clips included 2

On sale!

Exclusive GTTURBOPARTS.com In Stock

Body

Bonnet soundproof panel 7700754120 . Clips included

GT Turbo Parts Design. Bonnet pannel made with fireproof material. clips included

Battery terminals

In Stock

Electrics

Battery terminals

Front grille attachment kit

In Stock

Body

Front grille attachment kit

Kit de fijación de parrilla compuesto por dos grapas de plástico y tuerca central.

Sump partition with fixings.

In Stock

Engine

Sump partition with fixings.

Sump separation system. Fitted to avoid oil starvation in the pump.

This store asks you to accept cookies for performance and advertising purposes. Third-party advertising cookies are used to offer you personalized ad features. Do you accept these cookies?