4 height-adjustable shock absorbers, 3-way hardness adjustment. Assembled with a single ball joint and adjustable race top mounts. Helper and main springs included. 50mm shaft. The most advanced pure racing suspension available on the market for the R5 GT Turbo in terms of both finish and performance. Made by Technoshock after a long experience in...
14 pieces to completely rebuild the seats including headrests, side pieces, lower parts, upper parts and rear seats. Delivery time 1 week if no stock.
Front and rear shock absorbers adjustable in height, stiffness with 1 way acting simultaneously in bump and rebound. Choose the configuration you want, since they can be assembled with standard silentblock or with unibal and either with standard or adjustable top mounts. Springs are "helper" and main included. The best set available on the market for R5...
State of the art throttle obtained after many years of experience by our partner N.R.T., eliminates the flow restrictions of the stock carburetor to deliver unmatched performance.
Measurement range between 0.025 and 0.175mm. The simplest and most economical tool for measuring connecting rod and main bearings during engine assembly. Envelopes of 10 strips, enough for the assembly of 5 to 10 engines.
NOT INCLUDED the last section
Replacement speedometer sensor compatible with the original system. Supplied in kit to mount directly on the gearbox and the sealed connector that replaces the original.
*Note: It is required the recycling of the "T" junction protections and the alternator connector.
*Note: It is required the recycling of the "T" Junction protections and the alternator connector.
The best compound in the history of PFC, with countless championships achieved worldwide. The fame of this compound with unparalleled power and absolute braking control that makes it unbeatable whether on the stage or on the track. -Multi-layer technology. -Shot on the bench. They do not need adjustment in car. -Excellent disc care. -Delay pedal fadding....
Already assembled set of reinforced uprights + bigger bearing + bigger hub compatible with original bearings for high load applications such as competition or use of wheel spacers where we need greater rigidity of rolling elements. All pick up and steering points are the same as the original upright, so no changes needed. Todos los puntos de anclaje son...
14 pieces to completely rebuild the seats including headrests, side pieces, lower parts, upper parts and rear seats
This splitted flow downpipe has been done in 304 grade stainless steel, with lambda probe port.
Reinforced turbine housing for standard turbos.
It is an universal profile that we found the best for the place.
We immediately ship your orders. We only sell products in stock and give support with tracking service on demand.
We are here to serve you and you can reach us on our email: ventas@gtturboparts.com
Protected payment with PayPal. You can chose secure payment with card or PayPal.
GT Turbo Parts
We are a group of engineers with a common passion: the GT Turbo. Our speciality is the restoration and preparation of R5 Turbo. Do not hesitate and let us know your needs, we will give you the best solution.