Upper engine gasket set. Set include: -1 cylinder head gasket. 1.9mm and metalic sheet. -1 manifold gasket. metalic sheet. -1 Water pump inner gasket. -1 Water pump outer gasket. -1 head end gasket. -1 rocker cover gasket. -3 rocker cover nut gaskets.
Water pump (Complet assy.) Metalic turbine and 14.3mm outlet.
Standard 76.00mm Diameter Wössner forged pistons. Including rings, pins and circlips.
77.00mm Diameter Iasa forged pistons (1.434cc). Including rings, pins and circlips.
78.00mm Diameter Wössner forged pistons (1.471cc). Including rings, pins and circlips.
4 steel liners with spheroidal structure class 800, essential in high performance preparations. 76.00mm standard diameter. (1,397cc)
4 steel liners with spheroidal structure class 800, essential in high performance preparations. 77.00mm diameter. (1,434cc)
4 steel liners with spheroidal structure class 800, essential in high performance preparations. 78.00mm diameter. (1,471cc)
ATHENA muli layer head gasket, completely metallic composed of 4 blades to be used in street applications up to the highest performance, for pistons with diameters of 77.00 and 78.00mm. Its thickness is 1.8mm constant since it is not compressed like polymer joints. REUSABLE up to 4 times according to surfaces and tighten.
Reduced diameter version designed for high speed engines and to avoid alternator overvoltage, without affecting the flow of the water pump.
Full kit for engine rebuild: -Cylinder head -STD 76mm pistons, pins, rings and liners. -Nitrided crankshaft. -Gaskets set -High tensile head bolts. -Oil filter. -Fuel filter (tell us Phase 1 or 2). -Intake and exhaust valves -Spark plugs -Oil pump repair set (pinion and rotor). -STD rod and crank bearings.
Maximum thermal efficiency thanks to internal recirculation. This radiator has the particularity of processing the water cooling in 3 phases, optimizing the heat irradiation capacity as much as possible. By dimensions, it is the best compromise between space, weight and cooling capacity. NOTE: It does not have an oil cooling circuit.
Exclusive design of GT Turbo Parts for optimum cooling.
*Note: It is required the recycling of the "T" junction protections and the alternator connector.
Replacement speedometer sensor compatible with the original system. Supplied in kit to mount directly on the gearbox and the sealed connector that replaces the original.
Full kit of turbo brackets made in stainless steel
3 Measurement ranges 0.025-0.175mm (Red), 0.1-0.25mm (Blue). and 0.17-0.5mm (Green). The simplest and most economical tool for measuring connecting rod and main bearings during engine assembly. Envelopes of 10 strips, enough for the assembly of 5 to 10 motors.
In partnership with the best in engine development and competition to offer the highest level of engine rebuild service and quality assurance. Engiser101 has developed and built engines that have won national, European and World championships for brands and customers around the world. www.engiser101.com. More details below or contact us at...